根据网络拓扑和要求说明,完成(或解释)路由器R1 的配置:R1#configR1(config)# interface Fast

根据网络拓扑和要求说明，完成(或解释)路由器R1 的配置：

R1#config

R1(config)# interface FastEthernet 0/1

R1(config-if)#ip address (1) (2)

R1(config-if)#no shutdown

R1(config-if)#exit

R1(config)#ip dhcp pool vlan 3

R1(dhcp-config)#network 192.168.3.0 255.255.255.0

R1(dhcp-config)#default-router 192.168.3.254 255.255.255.0 ; (3)

R1(dhcp-config)#dns-server 192.168.2.1 ; (4)

R1(dhcp-config)#lease 0 8 0 ; (5)

R1(dhcp-config)#exit

R1(config)#ip dhcp pool vlan 4

R1(dhcp-config)#network (6) (7)

R1(dhcp-config)#default-router 192.168.4.254 255.255.255.0

R1(dhcp-config)#dns-server 192.168.2.1

R1(dhcp-config)#lease 0 8 0

R1(dhcp-config)#exit

R1(config)#ip dhcp excluded-address (8) (9)

R1(config)#ip dhcp excluded-address 192.168.3.254

//排除掉不能分配的IP 地址

R1(config)#ip dhcp excluded-address 192.168.4.254

R1(config)# (10) 192.168.3.0 255.255.255.0 FastEthernet0/1

//在以太网接口和VLAN3 间建立一条静态路由